If you are replacing FSP212-3F01 with
FSP212-3F02 Please Note: This
FSP212-3F02 is a new Substitute Power Supply Module that works as replacement for the discontinued FSP212-3F01. However, a modification must be performed as the new
FSP212-3F02 does not have the soldered on wiring to the 12 pin female connector. For the 12 pin connector you must connect (solder) the 12 wires from your old FSP212-3F01 to the new FSP212-3F02. You need to be careful during soldering because the traces are very close together. Also be aware of the pin-out orientation between the FSP212-3F01 and 3F02. They are different: one counts from right to left and the other from left to right. You can also buy a wiring harness part number
4WT0062302GP listed below for plugand play . If you are replacing the Darfon 4H.B0280.001with FSP212-3F02
Please Note:you will need a new wiring
harness part number 4WT0062302GP listed below